Skip to main content

EBTS

Introduction 

AtA Motorola Enhanced Base Station (EBTS) alone is quite limited feature-wise: only simplex group calls, no SDS, no status calls, no packet data. The aim of this time,guide TetraPackis to help you get your EBTS connected to our Virtual Core, and enjoy all TETRA features (+ TPC interconnects, coming soon™. 

You must have a basic understanding of the TETRA standard (how it behaves, how to program radios with MCC/MNCs, add talkgroups). Modifications on the EBTS settings will also be needed, make sure you're also feeling at ease with that. Some Linux Console knowledge as well as basic Cisco usage will also come in handy.

Disclaimer

  • Follow this guide at your own risk! This is an experimental bridge, and we can't be held responsible if anything bad happens to your precious EBTS! 

Hardware Requirements

  • A working EBTS/MBTS setup in lone site trunking mode (bare minimum: Base Radio + Site Controller). Don't forget an RS-232/USB converter if your computer doesn't supporta EBTS.native StayedDB9 tuned,connector!
  • this
  • Raspberry WILLPi
  • change
  • Cisco in2600XM Series router + E1 Card (either one or two ports, both will work). You'll also need an additional Ethernet USB Dongle for the nearPi. future!Make ;)sure you also have a console cable.
  • An E1 Crossover cable (RJ45 plugs). Schematic is as follows: 

Untitled.jpg