Skip to main content

PTC 760 RoIP

Coming Soon...

 

Small summary about using PTC760 (A10 revision) in TetraPack

1.

    it
  1. It works on EBTS as well as on CTS.

    2. 2.

  2. Group calls, individual calls (duplex and simplex), scan-lists work well. Phone calls require to switch radio to full-duplex mode first (how they are going to make phone calls in half-duplex? ;)).

    3. 3.

  3. PD and SDS don’t work at all. Since I have tested it on EBTS and CTS, it’s FW bug (3.5, from the factory). I was checking with adb and it seems there is a kind of mismatch between NB and Android parts of device. At least in case of PD phase of PDP attach finishes well, CHAP works correctly, the problem comes on the latest part of attach on the radio.

    4. 4.

  4. It has some specific with spacing configuration. Standard spacings 0-4 are hardcoded in FW. User-defined spacing uses index 7.

So if your EBTS/MBTS/MTS uses 7.6 spacing at index 7 there is no problem. But in case of CTS there is a difficult. CTS allows only to configure spacing to indexes 0-4 or so. So since i use CTS as a „hotspot“ with dummy load I decided to switch spacing to index 3 and 8 MHz by moving lower frequency down a bit. Most of CTSs use index 1 with 7.6 to fit to allocation with keeping limitations in mind.

At the end, most frequent question: could it use second SIM-slot for LTE? Yes, it’s configurable in MDM.

RoIP

Tested on A7 3.5 and A10 4.5 firmwares.

  • User name - your ID
  • Password - your BM’s hotspot password 
  • MNI - set what do you use in TMO configuration, most probably its 901 9999
  • Server - core.tetrapack.online (domain name, not IP! that's strict)
  • Port - use standard 3003

What you have to know else:
We have call floor management but without late call entry. So when call will be preempted or overlapped the next one will come only when the it begins.

Scan lists and SDSs (probably GPS) are supported.

 

Back to top